How much time a lower CdA saves: seconds by distance, from a 10 km time trial to an Ironman
CdA and time
45 s
What a 300 W rider gains in a flat 40 km time trial by lowering their CdA from 0.24 to 0.23 m², without changing power.
Model calculation: 78 kg with the bike, no wind, at sea level. It is worth the same as 11 W of extra power.
Lowering CdA by 0.01 m² saves about 45 seconds in a flat 40 km time trial, and the figure is almost the same for a 300 W time triallist as for a 220 W triathlete. Over the 180 km bike leg of an Ironman, the same improvement is worth about 3 minutes 21 seconds. The tables below give the seconds for each distance, and the rest of the article explains what decision to make with them.
How many seconds is each hundredth of CdA worth?
For a 300 W time triallist with a CdA of 0.24 m², riding at about 43 km/h on the flat:
| Distance | Starting time | −0.01 m² | −0.02 m² | −0.03 m² |
|---|---|---|---|---|
| 10 km | 13:51 | 11 s | 23 s | 35 s |
| 20 km | 27:42 | 22 s | 45 s | 1:09 |
| 40 km | 55:25 | 45 s | 1:31 | 2:18 |
| 90 km | 2:04:41 | 1:41 | 3:24 | 5:11 |
| 180 km | 4:09:22 | 3:21 | 6:48 | 10:21 |
Table 1. Seconds saved by lowering CdA from 0.24 m² at a constant 300 W. Model calculation: 78 kg with the bike, flat, no wind, sea level.
The gain grows almost in proportion to distance: each hundredth is worth a little over a second per kilometre. And it grows slightly more than in proportion to the improvement, because the lower the CdA, the faster you go and the more the air weighs.
What about a slower triathlete?
This is the part that surprises most. A 220 W triathlete with a CdA of 0.28 rides at about 37 km/h, a good deal slower. Yet they gain almost the same seconds for every hundredth:
| Distance | Starting time | −0.01 m² | −0.02 m² | −0.03 m² |
|---|---|---|---|---|
| 40 km | 1:05:11 | 45 s | 1:30 | 2:17 |
| 90 km (70.3) | 2:26:41 | 1:40 | 3:23 | 5:09 |
| 180 km (Ironman) | 4:53:21 | 3:21 | 6:46 | 10:17 |
Table 2. Seconds saved by lowering CdA from 0.28 m² at a constant 220 W. Same model and conditions as Table 1.
The reason is that the triathlete spends longer on the bike: every second per kilometre they gain is multiplied by more minutes of racing. What does change is what the improvement is worth in watts. For the time triallist, 0.01 less is worth 11 W; for the triathlete, 7 W. Put another way: in seconds, aerodynamics is worth the same to both; in watts, it is worth more to the faster rider.
What changes in the training plan?
The tables let you compare options in the same unit. If a six-week block can raise threshold power by a few watts and a position session can lower CdA by one or two hundredths, the tables tell you which is worth more seconds in the target event. The detailed comparison is in power or position before a time trial.
There is one condition: the CdA that counts is the one the rider holds during the event, not the best minute of the test. A lower position that cannot be held for an hour does not gain 45 seconds; it loses them as soon as the rider lifts their head. So when the position changes, the training plan has to include hours in it at race pace.
When is a lower position not worth it?
When it costs more watts than it saves. For the time triallist in the example, 0.01 less is worth 11 W; 0.02, 24 W; 0.03, 37 W. If the new position closes the hip so much that the rider loses more power than that, the net result is slower even though CdA has dropped. For the triathlete the margin is narrower: 7, 14 and 22 W for the same improvements. That is why each position change is judged on two numbers at once, the CdA and the power the rider can hold in it for the duration of the event.
In triathlon there is a third number: how the athlete comes off the bike to run. A position that saves a minute on the bike and costs two on the run is not an improvement. There the table does not make the decision; rehearsal does, with bike and run sessions in the new position before taking it to a race.
How do I know how much my rider’s CdA can drop?
By measuring it. Without a starting number any figure is a guess, and the difference between two similar positions can be one or two hundredths, exactly what you need to see. Methods range from the wind tunnel to road or velodrome tests, with different precision and cost4. For a coach, the practical option is a well-organised road test: how to run a CdA test with your rider. And after each race, check whether the test CdA held up: calculating CdA from the race .FIT.
How do you take it into the race?
- With the measured CdA in the plan: power targets and the forecast time are built on it, not on a generic value.
- With the position rehearsed: the one you measure is the one you race, with the same helmet, skinsuit and extension height.
- With a review afterwards: if the time did not come out, split how much was position and how much was power (explained in how to analyse a time trial with power).
Frequently asked questions
How much time does a lower CdA save in a 40 km time trial?
About 45 seconds for every 0.01 m², both at 300 W with a CdA of 0.24 and at 220 W with a CdA of 0.28, on the flat with no wind.
And in an Ironman?
About 3 minutes 20 seconds for every 0.01 m² over the 180 km bike leg, under the same conditions.
Is it worth the same with wind or climbs?
Into a headwind it is worth more, because the air weighs more. On climbs it is worth much less, because you are going slowly. The tables are for a flat course.
References
- Martin JC, Milliken DL, Cobb JE, McFadden KL, Coggan AR. Validation of a mathematical model for road cycling power. J Appl Biomech. 1998;14(3):276-91. doi:10.1123/jab.14.3.276
- Jeukendrup AE, Martin J. Improving cycling performance: how should we spend our time and money. Sports Med. 2001;31(7):559-69. doi:10.2165/00007256-200131070-00009
- García-López J, Rodríguez-Marroyo JA, Juneau CE, Peleteiro J, Martínez AC, Villa JG. Reference values and improvement of aerodynamic drag in professional cyclists. J Sports Sci. 2008;26(3):277-86. doi:10.1080/02640410701501697
- Debraux P, Grappe F, Manolova AV, Bertucci W. Aerodynamic drag in cycling: methods of assessment. Sports Biomech. 2011;10(3):197-218. doi:10.1080/14763141.2011.592209
Related articles
- AerodynamicsCalculating the CdA of a time trial you have already raced from the race .FIT: what works, what does not and what to do with the number7 min read
- AerodynamicsCdA values in cycling: what CdA is good on the road, in a time trial and in triathlon7 min read
- AerodynamicsChung method errors: what skews road-measured CdA and how to avoid it7 min read