How do I run a CdA test with my rider, and what do I do with the result?
Test example
45 s
What a 300 W rider gains over a flat 40 km time trial by cutting CdA from 0.240 to 0.230 m².
Worth about 11 W at 43 km/h. Model calculation with 78 kg and Crr 0.004; an example, not a real case.
Measuring CdA on the road with a power meter is possible and well studied1,2. What usually goes wrong is not the method but the session: a test with no clear question, done in the wrong week, with a result nobody turns into a decision. This is the guide to organising it from the coach’s side.
What question should the test answer?
Before heading out, one question and two possible answers. For example: “is the position with the bars 2 cm lower faster than the current one?” or “which helmet suits this rider best?”. A test that tries to measure five changes at once ends up answering none.
It is worth it because the difference is large. In the example above, cutting CdA by 0.010 m² is worth almost as much as 15 W of power: 45 seconds against 58 over 40 km. And in professionals, changing position alone cut drag by 14 %3.
| Change | Time saved over 40 km |
|---|---|
| CdA from 0.240 to 0.235 | 22 s |
| CdA from 0.240 to 0.230 | 45 s |
| CdA from 0.240 to 0.225 | 68 s |
| 15 W more, same CdA | 58 s |
Table 1. Example of a 300 W rider, 78 kg with the bike, on a flat 40 km time trial (55:25 to start with). Model calculation.
When should it be done?
- Well before the race: a new position needs weeks of training before the rider can hold their power in it. Testing the week before is only useful for choosing a helmet or clothing.
- At the start of the time-trial block: that way the rider already trains in the chosen position and arrives adapted.
- Whenever something important changes: bike, extensions, helmet or skinsuit. Every equipment change is a new CdA.
How is the session organised?
- A calm stretch on a calm day: wind is the biggest enemy of the measurement. Early morning is best, on a loop or an out-and-back stretch.
- At race pace, not static: in professionals, drag measured while pedalling at race pace was 31 % higher than in a static position3. Measure the position the rider actually holds.
- Alternate A, B, A: repeating the baseline at the end shows whether wind or temperature changed during the session.
- At least two runs per option: if two runs of the same option do not agree, the difference between options cannot be trusted.
- Nothing else changes: same pressure, same wheels, same clothing, same bottle. Only the variable being tested.
What do I do with the result?
- Decide on the position or equipment, table in hand: how much time the change is worth in the target time trial.
- Check power in the position: a 20-minute block at time-trial pace in the new position. If it drops, work on the change in training before taking it to a race.
- Update the race plan: the measured CdA feeds the times and the section-by-section power split. Field-measured CdA is closely linked to flat time-trial performance4, so a plan built on an assumed CdA carries an error in every number.
- Do not trust a single helmet: in the same study, the aero helmet was not favourable for every rider3. Test it on each one.
Frequently asked questions
How many times a year should CdA be measured?
At the start of each time-trial block and whenever the bike, position or main equipment changes. In between, there is no need.
What if the result looks odd?
It is almost always wind, noisy altitude data or a braking event. The usual mistakes are in Chung method errors.
In SuperRecord you upload the ride file, get the CdA with its reliability, and that value goes straight into the plan. To see what it means in a real time trial, try the demo on the Tour time trial.
References
- Debraux P, Grappe F, Manolova AV, Bertucci W. Aerodynamic drag in cycling: methods of assessment. Sports Biomech. 2011;10(3):197-218. doi:10.1080/14763141.2011.592209
- Lim AC, Homestead EP, Edwards AG, Carver TC, Kram R, Byrnes WC. Measuring changes in aerodynamic/rolling resistances by cycle-mounted power meters. Med Sci Sports Exerc. 2011;43(5):853-60. doi:10.1249/MSS.0b013e3181fcb140
- García-López J, Rodríguez-Marroyo JA, Juneau CE, Peleteiro J, Martínez AC, Villa JG. Reference values and improvement of aerodynamic drag in professional cyclists. J Sports Sci. 2008;26(3):277-86. doi:10.1080/02640410701501697
- Peterman JE, Lim AC, Ignatz RI, Edwards AG, Byrnes WC. Field-measured drag area is a key correlate of level cycling time trial performance. PeerJ. 2015;3:e1144. doi:10.7717/peerj.1144
Related articles
- AerodynamicsHow much time a lower CdA saves: seconds by distance, from a 10 km time trial to an Ironman6 min read
- AerodynamicsCalculating the CdA of a time trial you have already raced from the race .FIT: what works, what does not and what to do with the number7 min read
- AerodynamicsCdA values in cycling: what CdA is good on the road, in a time trial and in triathlon7 min read